BMW 8 Series Gran Coupé technical data

THE 8

BMW 8 SERIES GRAN COUPÉ: TECHNICAL DATA

THE 8BMW 8 SERIES GRAN COUPÉ: TECHNICAL DATA

Here you can find the technical data of the BMW 8 Series Gran Coupé.

TECHNICAL DATA OF THE BMW 8 SERIES GRAN COUPÉ

Select Model
Select Transmission

Engine

Cylinder/ Valves per cylinder 6 / 4
Technical capacity in cm3 2,998
Stroke/Drilling in mm 94.6 / 82
Engine performance in kW (hp) 245 (333) / 5500-6250
Max torque(Nm) per 1/min 500 / 1700-4000
Compression:1 11

Performance

Top Speed 250
Acceleration 5.4

Measurements

Length/Width/Height 5,074 / 1,932 / 1,401
Width incl. mirrors (driver / passenger side) in mm 2137 (1074 / 1063)
Wheelbase in mm/Wheel turn in m 3,023 / 12.3
Ground clearance in mm 121
Measurements
Measurements

Weight

Weight not loaded in kg 1,890
Weight Max in kg 2,435
Permitted load in kg 620
Permitted Axle load front/rear in kg 1,170 / 1,360
Trunk capacity min.-max. in l 440

Wheels

Tire front 245/35 R20 95 Y XL
Tire rear 275/30 R20 97 Y XL
Rim front 8Jx20 LM
Rim rear 9Jx20 LM

Consumption

Combined in l/100km 8.4 - 8.6
Tank capacity in l 68

CO2 Emissions

Combined in g/km 192 - 196

Fuel consumption and CO2 emissions

  • The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

    A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.