BMW 8 Series Coupé technical data.

THE 8

BMW 8 SERIES COUPÉ: TECHNICAL DATA

THE 8BMW 8 SERIES COUPÉ: TECHNICAL DATA

Here you can find the technical data of the BMW 8 Series Coupé.

Read more

TECHNICAL DATA OF THE BMW 8 SERIES COUPÉ

Select model

Weight

Unladen weight EU in kg 1,965
Max. permissible weight in kg 2,395
Permitted load in kg 505
Permitted axle load front/rear in kg 1,235/1,250
Luggage capacity in l 420
Trailer load 8% (braked) in kg -

Engine

Cylinders/valves 8/4
Capacity in ccm 4,395
Stroke/bore in mm 88.3/89.0
Engine power in kW (hp) at 1/min 390 (530)/5,500-6,000
Engine torque (Nm) at 1/min 750/1,800-4,600
Compression ratio : 1 10.5

Performance

Top speed in km/h 250
Acceleration 0–100 km/h in s 3.7

Fuel consumption

Urban in l/100 km 13.8-13.7
Extra-urban in l/100 km 7.7-7.6
Combined in l/100 km 10.0-9.9
CO2 combined emissions in g/km 227-224
Electricity consumption combined in kWh/100km -
Tank capacity, approx. in l 68

Wheels

Tyre dimensions front 245/35 R20 95Y XL
Tyre dimensions rear 275/30 R20 97Y XL
Wheel dimensions and material front 8 J x 20 inches, light-alloy
Wheel dimensions and material rear 9 J x 20 inches, light-alloy

Fuel consumption and CO2 emissions

The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.

Read more

Fuel consumption and CO2 emissions

The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.

Read more
Build Your Own (Build Your Own)