BMW 8 Series Convertible, technical data

THE 8 CONVERTIBLE

BMW 8 SERIES CONVERTIBLE: TECHNICAL DATA

THE 8 CONVERTIBLEBMW 8 SERIES CONVERTIBLE: TECHNICAL DATA

TECHNICAL DATA OF THE BMW 8 SERIES CONVERTIBLE

Select model

Weight

Unladen weight EU in kg 2,090
Max. permissible weight in kg 2,515
Permitted load in kg 500
Permitted axle load front/rear in kg 1,235/1,340
Luggage capacity min. (seats up or roof down) in l 280
Luggage capacity max. (seats down or roof up) in l 350
Trailer load (unbraked) in kg -
Trailer load 8% (braked) in kg -
Trailer load 12% (braked) in kg -

Engine

Cylinders/valves 8/4
Capacity in ccm 4,395
Stroke/bore in mm 88.3/89.0
Engine power in kW (PS) at 1/min 390 (530)/5,500-6,000
Engine torque (Nm) at 1/min 750/1,800-4,600
Compression ratio : 1 10.5

Performance

Top speed in km/h 250
Acceleration 0–100 km/h in s 3.9

Fuel consumption

Urban in l/100 km 14.1-13.9
Extra-urban in l/100 km 7.9-7.7
Combined in l/100 km 10.2-10.0
CO2 combined emissions in g/km 231-228
Tank capacity, approx. in l 68

Wheels

Tyre dimensions front 245/35 R20 95Y XL
Tyre dimensions rear 275/30 R20 97Y XL
Wheel dimensions and material front 8.0 J x 20 inches, light-alloy
Wheel dimensions and material rear 9.0 J x 20 inches, light-alloy

Fuel consumption and CO2 emissions.

  • The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

    A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.