BMW X6 M Competition BMW Individual Special Paint Urban Green SUV F96 2020 side view

THE X6 M

BMW M

THE BMW X6 M AUTOMOBILES: ENGINES & TECHNICAL DATA

THE X6 MTHE BMW X6 M AUTOMOBILES: ENGINES & TECHNICAL DATA

Here you can find the technical data of the BMW X6 M Automobiles – BMW X6 M Competition, BMW X6 M, BMW X6 M50i and BMW X6 M50d.

Read more

Engines and technical data.

Select model

Weight

Unladen weight EU in kg 2,370
Max. permissible weight in kg 3,000
Permitted load in kg 705
Permitted axle load front/rear in kg 1,410/1,630
Luggage capacity min. (seats up or roof down) in l 580
Luggage capacity max. (seats down or roof up) in l 1,530
Trailer load (unbraked) in kg 750
Trailer load 8% (braked) in kg 3,000
Trailer load 12% (braked) in kg 3,000

Engine

Cylinders/valves 8/4
Capacity in ccm 4,395
Stroke/bore in mm 88.3/89.0
Engine power in kW (PS) at 1/min 460 (625)/6,000
Engine torque (Nm) at 1/min 750/1,800-5,850
Compression ratio : 1 10.0

Performance

Top speed in km/h 250 (290)
Acceleration 0–100 km/h in s 3.8

Fuel consumption

Urban in l/100 km 17.5-16.8
Extra-urban in l/100 km 10.0-9.5
Combined in l/100 km 12.7-12.5
CO2 combined emissions in g/km 289-284
Tank capacity, approx. in l 83

Wheels

Tyre dimensions front 295/35 ZR21 107Y ZL
Tyre dimensions rear 315/30 ZR22 107Y XL
Wheel dimensions and material front 10,5 J x 21 inches, light-alloy
Wheel dimensions and material rear 11,5 J x 22 inches, light-alloy

Fuel consumption and CO2 emissions.

  • The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

    A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.