TECHNICAL DATA.

Weight

Unladen weight EU in kg 1,425
Max. permissible weight in kg 1,910
Permitted load in kg 525
Permitted axle load front/rear in kg 985/970
Luggage capacity min. (seats up or roof down) in l 468
Luggage capacity max. (seats down or roof up) in l 1,510
Trailer load (unbraked) in kg 695
Trailer load 8% (braked) in kg 1,100
Trailer load 12% (braked) in kg 1,100

Engine

Cylinders/valves 3/4
Capacity in ccm 1,499
Stroke/bore in mm 94.6/82.0
Engine power in kW (PS) at 1/min 80 (109)/4,300-6,500
Engine torque (Nm) at 1/min 190/1,380-3,800
Compression ratio : 1 11.0

Performance

Top speed in km/h 190
Acceleration 0–100 km/h in s 11.3
Electrical engine top speed in km/h -

Fuel consumption

Urban in l/100 km 7.0
Extra-urban in l/100 km 5.0
Combined in l/100 km 5.8
CO2 combined emissions in g/km 132
Tank capacity, approx. in l 51

Wheels

Tyre dimensions front 205/60 R16 96V XL
Tyre dimensions rear 205/60 R16 96V XL
Wheel dimensions and material front 7 J x 16 inches, light-alloy
Wheel dimensions and material rear 7 J x 16 inches, light-alloy

Range and charging

Electric range in km -
Energy consumption in kWh/100km
Growth capacity of lithium-ion battery in kWh -
Charging time 3,7 kW/16 A, BMW i Wallbox (80 %) h -
Charging time 3,7 kW/16 A, BMW i Wallbox (100 %) h -

Electric engine

Electric engine power kW (PS) at 1/min -
Electric Engine torque (Nm) at 1/min -

Combined system power

Combined power kW (PS) -
Combined torque Nm -

Information about the data.

  • The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

    A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.