BMW 1 Series, technical data

THE 1

THE BMW 1 SERIES: ENGINES & TECHNICAL DATA

Here you can find all the engines, data, specifications and dimensions of the BMW 1 Series.

Read more
THE 1THE BMW 1 SERIES: ENGINES & TECHNICAL DATA

TECHNICAL DATA OF THE BMW 1 SERIES.

Engine

Cylinder/ Valves per cylinder 3 / 4
Technical capacity in cm3 1,499
Stroke/Drilling in mm 94.6 / 82
Engine performance in kW (hp) 100 (136) / 4500-6500
Max torque(Nm) per 1/min 220 / 1500-4100
Compression:1 11

Performance

Top Speed 213
Acceleration 8.8

Measurements

Length/Width/Height 4,319 / 1,799 / 1,434
Width incl. mirrors (driver / passenger side) in mm 2081 (1045 / 1036)
Wheelbase in mm/Wheel turn in m 2,670 / 11.4
Ground clearance in mm 153

Weight

Weight not loaded in kg 1,395
Weight Max in kg 1,870
Permitted load in kg 550
Permitted Axle load front/rear in kg 1,005 / 940
Allowed unbraked trailer load / drawbar load in kg 695 / 75
Allowed braked trailer load up to 12 % / 8 % incline in kg 1,300 / 1,300
Trunk capacity min.-max. in l 380 - 1200

Wheels

Tire front 205/55 R16 91 W
Tire rear 205/55 R16 91 W
Rim front 7Jx16 LM
Rim rear 7Jx16 LM

Consumption

Combined in l/100km 5.7 - 5.9
Tank capacity in l 42

CO2 Emissions

Combined in g/km 129 - 134

BMW WHEELS & TYRES.

BMW WHEELS & TYRES.

We subject the tyres for our vehicles to stringent tests with up to 50 different quality criteria – significantly more than prescribed by the uniform tyre labelling regulation that applies throughout Europe. This is where you will find all the information on the properties of the tyres used at BMW.

Fuel consumption and CO2 emissions of the BMW 1 Series.

  • The values for fuel consumption, CO2 emissions and energy consumption shown have been determined according to the WLTP test. WLTP has been used as the applicable fuel and energy consumption and CO2 emissions figure from 1 January 2021 for vehicle registration tax (VRT). The figures were previously based on the NEDC equivalent. Figures shown are for comparability purposes. Only compare fuel consumption, CO2 and electric range figures with other cars tested to the same technical procedures. These figures may not reflect real life driving results, which will depend upon a number of factors including the starting charge of the battery, accessories fitted (post-registration), variations in weather, driving styles and vehicle load. For plug-in hybrid vehicles these figures were obtained using a combination of battery power and fuel. Plug-in hybrid and battery electric vehicles require mains electricity for charging. More information on the WLTP test procedure can be found here: https://www.bmw.ie/en/topics/fascination-bmw/efficient-dynamics/consumption-emissions.html

    A guide on fuel economy and CO2 emissions which contains data for all new passenger car models is available at any point of sale free of charge.